Pro-Form CARBON STRENGTH POWER TOWER User Manual

6
PART IDENTIFICATION CHART
M6 Washer
(20)–6
M10 Washer
(17)–20
M10 Locknut
(16)–26
M10 x 55mm Screw (21)–2
M10 x 70mm Bolt (19)–16
M10 x 95mm Bolt (18)–10
M6 x 95mm Screw (8)–4
M6 x 70mm Screw (7)–2
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in
the hardware kit, check to see whether it has been preassembled. Extra parts may be included.

Pro-Form CARBON STRENGTH POWER TOWER Specifications

General

Brand	Pro-Form
Model	CARBON STRENGTH POWER TOWER
Category	Fitness Equipment
Language	English