17
ADJUSTING THE BACKREST
To adjust the position of the Backrest (40), hold the
indicated handle (B) on the Backrest Post (36), raise
or lower the Backrest, and then set the Backrest
Post in one of the slots (C) in the Frame (22). Make
sure that the Backrest Post is fully inserted into
one of the slots.
36
22
C
40
B
ATTACHING AND REMOVING THE CURL BAR
To attach the Curl Bar (38) to the Leg Lever (26),
fully insert the Curl Bar Pin (54) into the Leg Lever
and the Curl Bar as shown.
When performing exercises that do not require the
Curl Bar (38), pull the Curl Bar Pin (54) out of the
Leg Lever (26), and remove the Curl Bar.
38
USING THE LEG LEVER
If you plan to use Olympic weights (not included),
see assembly step 11 on page 13 and attach
the Olympic Adapter (8) to the Weight Tube (45).
To use the Leg Lever (26), slide the desired weights
(D) (not included) onto the Weight Tube (45). Secure
the weights with the Standard Spring Clip (30) or the
Olympic Spring Clip (49). Note: Before using the
Leg Lever, remove the Curl Bar (not shown) and
the Curl Pad (not shown).
WARNING: Do not place more
than 150 lbs. (68 kg) on the Leg Lever (26).
30, 49
8
45
26
D
54
26
To Next Page
Loading...
Need help?
General
