7
• Remove the packing materials. Do not dispose of
the packing materials until you fi nish the assem-
bly steps.
• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
ASSEMBLY
2
2. Make sure that the power cord is unplugged.
Using your foot, press down the lever on the
Latch Frame (59) and raise the Uprights (50, 53)
until they lock into the upright position. Be care-
ful not to pinch hands or fi ngers.
59
50
53
1. To use the assembly steps in this manual, first see the helpful tips below.
To Next Page
Loading...
Need help?
General