Timer
Timer+cycle Mode
Heater
Environmental Control
Cooling
Environmental Control
Humidify(HUM)
Environmental Control
Dehumidify(DEHUM)
Environmental Control
CO2 UP
Environmental Control
CO2 DOWN
Environmental Control
Irrigation trigger output
(Trigger)
The output signal of on (d contact conduction) after feilizer distribution
can be used to trigger the sta of other equipment, such as irrigation.
Among them, the function of alternate irrigation is to set the irrigation sub-valve in the po
rst. For example, the user rst sets up 3 sub-irrigation sub-valves. Assuming that the cycle time of
irrigation on is 1 hour, the system will work according to the order of the irrigation sub-valve in the
po. 20 minutes.
The following is the inteace for setting the 4-bit sma socket (optional)：
22
To Next Page
Loading...