Pro-Leaf Aqua-Pro - Page 32

Alarm po (NO/NC) switch setting:
EC alarm switch setting;
pH alarm switch setting;
Water level alarm switch setting;
CO2 alarm switch setting;
Temperature alarm switch setting;
Humidity alarm switch setting;
Peristaltic pump alarm switch setting;
Online switch setting of sensors and actuators;
Water level sensor real-time data, calibration data.
The water level sensor is manually calibrated and reset.
CO2 real-time data, calibration data.
Calibrating and resetting the CO2 sensor manually.
If the water level sensor or CO2 sensor is not connected,
it will alarm：
Manually calibrate water level and CO2 Settings
29