13. EC Declaration of conformity
We hereby declare that the product described below:
CS 300 Door Control
is in conformity with all essential requirements of the
Machinery Directive 2006/42/EC.
In addition, the logic unit is in conformity with all the provisions
of the
− EC Construction Products Regulation (305/2011/EC),
− Electromagnetic Compatibility Directive (2014/30/EC),
− Low Voltage Directive (2014/35/EC).
The following standards were applied:
EN 60204-1: 2006
Safety of machinery, electrical equipment of machines; Part 1:
General requirements
EN ISO 12100: 2010
Safety of machinery – general principles for design - risk
assessment and risk reduction
DIN EN 12453: 2000
Safety in use of power operated doors - Requirements
prEN 12453: 2014
Safety in use of power operated doors
(exclusively for items 1.3.7 and 1.4.3 of Annex I of the
Machinery Directive)
DIN EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic
standards - Immunity for industrial environments
DIN EN 61000-6-3
Electromagnetic compatibility (EMC) - Part 6-3:
Generic standards - Emission - standard for residential,
commercial and light-industrial environments
DIN EN 60335-1: 2012
Household and similar electrical appliances - Safety - Part 1:
General requirements
DIN EN 60335-2-103: 2003
Household and similar electrical appliances - Safety - Part
2-103: Particular requirements for drives for gates, doors and
windows
The relevant technical documentation is compiled in
accordance with Annex VII (B) of the EC Machinery Directive
2006/42/EC. We undertake to transmit, in response to a
reasoned request by the market surveillance authorities, this
information in electronic form within a reasonable term.
Person authorised to compile the relevant technical
documentation:
The logic unit must not be put into service until the machinery
into which the logic unit is to be incorporated has been
declared in conformity with the provisions of the Machinery
Directive 2006/42/EC.
Place / Date:
Manufacturer’s signature
Position of signatory