pro.point 8619470 - Page 40

40
©All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted by any means,
electronic, mechanical, photocopying or otherwise without the prior permission of ©Uniarc® the copyright holder.
Description
Cup Gasket
Description
Collet 1.0mm / 0.040”
Collet 1.6mm / ((1/16)
Collet 2.4mm / (3/32)
Collet 3.2mm / (1/8)
Description
Collet Body 1.0mm / 0.040”
Collet Body 1.6mm / (1/16)
Collet Body 2.4mm / (3/32)
Collet Body 3.2mm / (1/8)
Description
Alumina Nozzle Ø 6mm / (15/64) #4
Alumina Nozzle Ø 8mm / (5/16) #5
Alumina Nozzle Ø 10mm / (25/64) #6
Alumina Nozzle Ø 11mm / (7/16) #7
Alumina Nozzle Ø 13mm / (33/64) #8
Alumina Nozzle Ø 16mm / (5/8) #10
Alumina Nozzle Ø 19mm / (3/4) #12
Description
Long Alumina Nozzle Ø 8mm / (5/16) #5L
Long Alumina Nozzle Ø 10mm / (25/64) #6L
Long Alumina Nozzle Ø 11mm / (7/16) #7L
Description
Gas Lens Gasket
Description
Gas Lens Body 1.6mm / (1/16)
Gas Lens Body 2.4mm / (3/32)
Gas Lens Body 3.2mm /(1/8)
Description
Gas lens ceramic 8.0mm / (5/16)
Gas lens ceramic 7.0mm / (9/32)
Gas lens ceramic 5.0mm / (13/64)
Compact Gas Lens Front End Parts
Description
1.0mm x 175mm / 0.040” x 6
57
/
64
” thoriated tungsten electrode 2%
1.6mm x 175mm / (1/16) x 6
57
/
64
” thoriated tungsten electrode 2%
2.4mm x 175mm / (3/32) x 6
57
/
64
” thoriated tungsten electrode 2%
3.2mm x 175mm / (1/8) x 6
57
/
64
” thoriated tungsten electrode 2%
Description
1.0mm x 175mm / 0.040” x 6
57
/
64
” zirconiated tungsten electrode 1%
1.6mm x 175mm / (1/16) x 6
57
/
64
” zirconiated tungsten electrode 1%
02.4mm x 175mm / (3/32) x 6
57
/
64
” zirconiated tungsten electrode 1%
3.2mm x 175mm / (1/8) x 6
57
/
64
” zirconiated tungsten electrode 1%
TR0004-16
RED
ANSI/AWS A5.12-98
ISO 6848 WT20
2% Thoriated: Best stability
at medium currents, good arc
starts, medium tendency to
spit, medium erosion rate.
Commonly used for steel and
stainless steel applications
1/16 x 7” (1.6mm x 175mm)
3/32 x 7” (2.4mm x 175mm)
1/8 x 7” (3.2mm x 175mm)
WHITE
ANSI/AWS A5.12 M-98
ISO 6848 WZ8
.8% Zirconiated: Balls well, handles
higher current with less spitting, bet-
ter arc starts and arc stability than
pure tungsten
Commonly used for
aluminium applications
1/16 x 7” (1.6mm x 175mm)
3/32 x 7” (2.4mm x 175mm)
1/8 x 7” (3.2mm x 175mm)
TR0006-16
tt
tt
TIG Torch 8618456 Spare Part
Sold Seperately