2. Inspect the tool components periodically. Repair or replace
damaged or worn components.. Only use identical replacement
parts when servicing.
3. Only use accessories intended for use with this tool. Follow
instructions for changing accessories.
4. Keep the tool handles or gripping surfaces clean and dry.
5. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
WARNING! Only qualified service personnel should repair
the tool. An improperly repaired tool may present a hazard
to the user and/or others.
ENGINE MAINTENANCE
The following section includes a maintenance schedule, routine
inspection procedures and simple maintenance procedures using basic
hand tools. Service tasks that are more difficult or require special tools
are best handled by a technician or other qualified mechanic.
1. Maintain the engine with care. A well-maintained engine is more
efficient and less likely to have problems.
2. Follow instructions for servicing
3. Inspect the engine components periodically. Check fuel lines, tank,
cap and fittings frequently for cracks or leaks. Have damaged
or worn components repaired or replaced by an authorized
technician.
4. Replacement parts must match the original. Use manufacturer
recommended parts when possible.
5. Disconnect the negative battery lead, then the positive battery
lead.
6. Disconnect the spark plug lead and keep it away from the spark
plug during maintenance and repairs.
7. Maintain the engine’s label and name plate. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
V1.1
GASOLINE GENERATOR WITH ELECTRIC START 8953168
Page 15 Assistance available at www.princessauto.com or 1-800-665-8685
To Next Page
Loading...