To Next PageTo Next Page
Need help?Do you have a question about the Pro-Tronik AP680BLC and is the answer not in the manual?
Automatic adjustments, secure Lithium process reducing overload/explosion risks.
Sophisticated balancing circuit for real-time cell checking and balancing.
Fast Lithium charge reducing time; storage charge level for weeks.
Charger limited to 80W, impacting max charge current for high voltage batteries.
Automatic charge termination based on Delta-Peak voltage sensitivity.
Option to auto-detect or manually set NiCd/NiMh charge current.
Maximum capacity calculation based on time and current; stops when limit is reached.
Temperature monitoring and automatic stop of charge/discharge/balance process.
Safety timer to reduce accident risks, but user must remain present.
Input voltage is checked; process stops if voltage is out of limits.
5 user memories for storing and recalling custom parameters.
Cycling function for up to 5 charge/discharge cycles to stimulate batteries.
Discharge function to remove memory effect and restore capacity, requires careful values.
Safety guidelines for handling batteries and charger, including placement and ventilation.
Precautions for electrical connections, input power, and avoiding short circuits.
Importance of verifying battery cell assembly and charger-detected parameters.
Disconnect battery after process and consult error chart for issues.
Handling faulty Lithium batteries, safe disposal, and neutralization.
Prohibition of dismantling battery packs and list of incompatible batteries.
Checklist before starting processes and manufacturer liability disclaimer.
Overview of the charger's physical components, ports, and display.
Explanation of the information displayed on the LCD screen during operation.
Configuration of user-defined settings and parameters for various functions.
Programs for Lithium batteries: Charge, Discharge, Storage, Fast Charge, Balance.
Programs for NiMh and NiCd batteries: Charge, Cycle, Discharge.
Programs for Lead Acid batteries: Charge and Discharge.
Functions for saving and loading custom program configurations.
Selection of Lithium battery types (LiPo, LiFe, LiIo) and their nominal voltages.
Configuration of input power cut-off and audible alerts (beeps, buzzer).
Setting capacity limits, safety timers, and waiting periods between cycles.
Temperature cut-off setup and Delta-Peak sensitivity for NiCd/NiMh batteries.
Setting detection time for Lithium battery cells, recommending default values.
Launching Lithium charge, checking voltage/cells, connection advice.
Discharging Lithium batteries with automatic voltage limit setting.
Preparing Lithium batteries for long-term storage at nominal voltage.
Faster charging algorithm for Lithium batteries, reducing time in final stages.
Importance of balanced cells for performance and avoiding damage.
Charging Ni-Mh/Ni-Cd batteries by setting maximum charge current.
Cycling to restore optimal performance or remove battery memory effect.
Discharging batteries with adjustable current and voltage limits.
Charging Lead Acid batteries from 2 to 20 Volts with specific current recommendations.
Discharging Lead Acid batteries with specified current and voltage limits.
Saving current settings to one of five memory slots for later recall.
Loading previously saved custom programs from memory slots.
Key specifications of the charger including input, power, current, and dimensions.
Nominal and maximum voltages, charging currents for various battery types.
Descriptions of error messages and initial troubleshooting steps.
Troubleshooting for battery voltage issues, cell connection errors, and input voltage problems.
Guidance for handling system errors, reverse polarity, connection breaks, and short circuits.
Checking low voltage battery states and consulting manufacturer if needed.
Charger warranty period and conditions.
Items not covered by warranty, including connection errors and misuse.
General| Brand | Pro-Tronik |
|---|---|
| Model | AP680BLC |
| Category | Battery Charger |
| Language | English |
