Why iPod/iPhone does not turn on or does not work with ProAudio PP107235?
If your iPod/iPhone does not turn on or does not work with your ProAudio Receiver: * Check the connection between this unit and iPod/iPhone. * Disconnect and reset the iPod/iPhone using hard reset.
What to do if my ProAudio PP107235 Receiver displays “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”?
If your ProAudio Receiver shows the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”, turn the power off. Check to be sure the terminals of the speaker wires are insulated properly, and then turn the power on again.
What does “CONNECTING” mean on my ProAudio PP107235?
If “CONNECTING” appears on your ProAudio Receiver, it means: * When connected via USB: The device is connecting to the head unit; please wait. * When connected via Bluetooth: The Bluetooth is disconnected. Please check the Bluetooth connection and make sure both the device and the unit are paired and connected.
Why is voice calling method not successful on ProAudio Receiver?
If the voice calling method is not successful on your ProAudio Receiver: * Use voice calling method in a quieter environment. * Reduce the distance from the microphone when you speak the name. * Make sure the same voice as the registered voice tag is used.
What does “LOADING” mean when searching on ProAudio PP107235?
If “LOADING” appears when you enter search mode on your ProAudio Receiver, the unit is still preparing the iPod/iPhone music list. It may take some time to load, so try again later.
What does “CH LOCKED LOCK CODE?” mean on my ProAudio Receiver?
If “CH LOCKED LOCK CODE?” appears on your ProAudio Receiver, the selected channel is locked. Enter the correct pass code to unlock it.
How to improve radio reception on ProAudio Receiver?
To improve radio reception on your ProAudio Receiver, connect the antenna firmly.
Why is playback order not as intended on ProAudio PP107235 Receiver?
The playback order is determined by the order in which file names were recorded (USB) on your ProAudio Receiver.
What does “SCAN CANCEL” mean on my ProAudio PP107235 Receiver?
If “SCAN CANCEL” appears on your ProAudio Receiver, it means TuneScan has been aborted.
What does “NO INFO”/“NO DATA” mean on my ProAudio Receiver?
If “NO INFO” or “NO DATA” appears on your ProAudio Receiver, it means the Bluetooth device cannot get the contact information.
To Next Page
General