ProAudio PP107237 - User Manual

Questions and Answers

S
Steve OwenSep 9, 2025
Why iPod/iPhone does not turn on or does not work with ProAudio PP107237 Receiver?
- J
  John RobertsSep 9, 2025
  If your iPod/iPhone does not turn on or does not work with your ProAudio Receiver: * Check the connection between this unit and iPod/iPhone. * Disconnect and reset the iPod/iPhone using hard reset.
G
George BallardAug 25, 2025
What to do if my ProAudio Receiver displays “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”?
- M
  Marcus MarshallAug 25, 2025
  If your ProAudio Receiver shows the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”, turn the power off. Check to be sure the terminals of the speaker wires are insulated properly, and then turn the power on again.
G
gwendolynkiddAug 25, 2025
What does “CONNECTING” mean on my ProAudio PP107237 Receiver?
- R
  Roger HoweAug 26, 2025
  If “CONNECTING” appears on your ProAudio Receiver, it means: * When connected via USB: The device is connecting to the head unit; please wait. * When connected via Bluetooth: The Bluetooth is disconnected. Please check the Bluetooth connection and make sure both the device and the unit are paired and connected.
B
Benjamin GlassSep 23, 2025
Why is voice calling method not successful on ProAudio PP107237?
- J
  James ZhangSep 23, 2025
  If the voice calling method is not successful on your ProAudio Receiver: * Use voice calling method in a quieter environment. * Reduce the distance from the microphone when you speak the name. * Make sure the same voice as the registered voice tag is used.
A
Anthony MillerSep 10, 2025
What does “LOADING” mean when searching on ProAudio PP107237 Receiver?
- C
  Craig FlynnSep 10, 2025
  If “LOADING” appears when you enter search mode on your ProAudio Receiver, the unit is still preparing the iPod/iPhone music list. It may take some time to load, so try again later.
P
Paul WestSep 15, 2025
What does “CH LOCKED LOCK CODE?” mean on my ProAudio PP107237?
- B
  Benjamin PhillipsSep 15, 2025
  If “CH LOCKED LOCK CODE?” appears on your ProAudio Receiver, the selected channel is locked. Enter the correct pass code to unlock it.
B
brittany45Sep 4, 2025
How to improve radio reception on ProAudio Receiver?
- H
  hannahrogersSep 4, 2025
  To improve radio reception on your ProAudio Receiver, connect the antenna firmly.
E
Elizabeth BrownSep 5, 2025
Why is playback order not as intended on ProAudio PP107237?
- S
  Scott LangSep 5, 2025
  The playback order is determined by the order in which file names were recorded (USB) on your ProAudio Receiver.
J
Jonathan TaylorSep 23, 2025
What does “SCAN CANCEL” mean on my ProAudio PP107237?
- H
  heatherdavidsonSep 23, 2025
  If “SCAN CANCEL” appears on your ProAudio Receiver, it means TuneScan has been aborted.
P
Philip MelendezAug 30, 2025
What does “NO INFO”/“NO DATA” mean on my ProAudio PP107237?
- H
  hsandersAug 30, 2025
  If “NO INFO” or “NO DATA” appears on your ProAudio Receiver, it means the Bluetooth device cannot get the contact information.