To Next Page
M
Madeline NguyenSep 23, 2025
What does “NO SIGNAL” mean on ProAudio PP107237?
- TTami RobertsonSep 23, 2025
If “NO SIGNAL” appears on your ProAudio Receiver, make sure the antenna is mounted outside the vehicle.
What does “NO SIGNAL” mean on ProAudio PP107237?
If “NO SIGNAL” appears on your ProAudio Receiver, make sure the antenna is mounted outside the vehicle.
What does “CODE ERROR” mean on my ProAudio PP107237 Receiver?
If “CODE ERROR” appears on your ProAudio Receiver, make sure you have entered the correct pass code.
What does “SCAN CANCEL” mean on my ProAudio PP107237?
If “SCAN CANCEL” appears on your ProAudio Receiver, it means TuneScan has been aborted.
What does “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” mean on my ProAudio PP107237 Receiver?
If “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” appears on your ProAudio Receiver, it means your subscription is updated.
What to do if my ProAudio Receiver displays “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”?
If your ProAudio Receiver shows the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”, turn the power off. Check to be sure the terminals of the speaker wires are insulated properly, and then turn the power on again.
What does “CONNECTING” mean on my ProAudio PP107237 Receiver?
If “CONNECTING” appears on your ProAudio Receiver, it means: * When connected via USB: The device is connecting to the head unit; please wait. * When connected via Bluetooth: The Bluetooth is disconnected. Please check the Bluetooth connection and make sure both the device and the unit are paired and connected.
Why is the Bluetooth connection between my Bluetooth device and ProAudio PP107237 Receiver unstable?
If the Bluetooth connection between your Bluetooth device and the ProAudio Receiver is unstable, delete the unused registered Bluetooth devices from the unit.
What does “NO DEVICE” mean on my ProAudio PP107237?
If the message “NO DEVICE” appears on your ProAudio Receiver, connect a device (USB/iPod/iPhone) and change the source to USB or iPod USB again.
What does “iPod ERROR” mean on my ProAudio PP107237?
If “iPod ERROR” appears on the display of your ProAudio Receiver, try to reconnect the iPod. If the problem persists, reset the iPod.
Why is sound being interrupted during Bluetooth playback on ProAudio PP107237?
If the sound is being interrupted or skipped during playback of a Bluetooth audio player on your ProAudio Receiver: * Reduce the distance between the unit and the Bluetooth audio player. * Turn off, then turn on the unit and try to connect again. * Consider that other Bluetooth devices might be trying to connect to the unit.
General| Channels | 7.2 |
|---|---|
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Type | AV |
| Bluetooth | Yes |
| Wi-Fi | Yes |
