ProAudio PP107237 - Bluetooth - Mobile Phone

Auto Pairing
When you connect iPhone/iPod touch to the USB input terminal, pairing
request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to
[ON] . (Page 20)
Press the volume knob to pair once you have confirmed the device name.
Bluetooth — Mobile phone
Receive a call
When there is an incoming call:
• [ZONE 2] illuminates in green color and flashes.
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected
time. (Page18)
During a call:
• [ZONE 1] illuminates according to the settings made for [DISPLAY]
(page25) and [ZONE 2] illuminates in green color.
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
Bluetooth®
ENGLISH
17
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate On the remote control
First incoming call...
Answer a call
Press
or the
volume knob or
one of the number
buttons (1 to 6).
Press
.
Reject a call
Press
.
Press .
End a call
Press
.
Press .
While talking on the first incoming call...
Answer another
incoming call and hold
the current call
Press
.
Press .
Reject another incoming
call
Press
.
Press .
While having two active calls...
End current call and
activate held call
Press
.
Press .
Swap between the
current call and held call
Press
.
Press .
Adjust the phone
volume*1
[00] to [35] (Default: [15] )
Turn the volume
knob during a call.
Press VOL *2 or
VOL during a call.
Switch between hands-
free and private talk
modes*3
Press 6 IW during
a call.
( Not available )