What does “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” mean on my ProAudio PP107237 Receiver?
If “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” appears on your ProAudio Receiver, it means your subscription is updated.
Why iPod/iPhone does not turn on or does not work with ProAudio PP107237 Receiver?
If your iPod/iPhone does not turn on or does not work with your ProAudio Receiver: * Check the connection between this unit and iPod/iPhone. * Disconnect and reset the iPod/iPhone using hard reset.
What does “NO INFO”/“NO DATA” mean on my ProAudio PP107237?
If “NO INFO” or “NO DATA” appears on your ProAudio Receiver, it means the Bluetooth device cannot get the contact information.
What does “CODE ERROR” mean on my ProAudio PP107237 Receiver?
If “CODE ERROR” appears on your ProAudio Receiver, make sure you have entered the correct pass code.
What does “NA FILE” mean on my ProAudio PP107237 Receiver?
If “NA FILE” appears on your ProAudio Receiver, make sure the media (USB) contains supported audio files.
What does “CH LOCKED LOCK CODE?” mean on my ProAudio PP107237?
If “CH LOCKED LOCK CODE?” appears on your ProAudio Receiver, the selected channel is locked. Enter the correct pass code to unlock it.
Why is voice calling method not successful on ProAudio PP107237?
If the voice calling method is not successful on your ProAudio Receiver: * Use voice calling method in a quieter environment. * Reduce the distance from the microphone when you speak the name. * Make sure the same voice as the registered voice tag is used.
What does “NO DEVICE” mean on my ProAudio PP107237?
If the message “NO DEVICE” appears on your ProAudio Receiver, connect a device (USB/iPod/iPhone) and change the source to USB or iPod USB again.
Why is the Bluetooth connection between my Bluetooth device and ProAudio PP107237 Receiver unstable?
If the Bluetooth connection between your Bluetooth device and the ProAudio Receiver is unstable, delete the unused registered Bluetooth devices from the unit.
What does “CONNECTING” mean on my ProAudio PP107237 Receiver?
If “CONNECTING” appears on your ProAudio Receiver, it means: * When connected via USB: The device is connecting to the head unit; please wait. * When connected via Bluetooth: The Bluetooth is disconnected. Please check the Bluetooth connection and make sure both the device and the unit are paired and connected.
General| Channels | 7.2 |
|---|---|
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Type | AV |
| Bluetooth | Yes |
| Wi-Fi | Yes |
To Next Page
