Why is the connected Bluetooth audio player not controlled by my ProAudio PP107235?
If the connected Bluetooth audio player cannot be controlled by your ProAudio Receiver: * Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). * Try disconnecting and reconnecting the Bluetooth player again.
What does “ERROR” mean on my ProAudio PP107235?
If “ERROR” appears on your ProAudio Receiver, try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.
What does “NO INFO”/“NO DATA” mean on my ProAudio Receiver?
If “NO INFO” or “NO DATA” appears on your ProAudio Receiver, it means the Bluetooth device cannot get the contact information.
What does “SWITCHING NG” mean on ProAudio PP107235 Receiver?
If “SWITCHING NG” appears on your ProAudio Receiver, it means the connected phones might not support the phone switching feature.
How to fix ProAudio PP107235 Receiver when sound cannot be heard?
If you cannot hear any sound from your ProAudio Receiver, first, adjust the volume to the optimum level. If the sound is still not audible, check the cords and connections to ensure they are properly connected.
What does “NO CONTENT” mean on my ProAudio PP107235 Receiver?
If “NO CONTENT” appears on your ProAudio Receiver, it means there is insufficient content to start TuneScan.
Why is Bluetooth pairing not working on my ProAudio PP107235 Receiver?
If Bluetooth pairing cannot be made on your ProAudio Receiver: * Make sure you have entered the same PIN code to both the unit and Bluetooth device. * Delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
Why is the phone sound quality poor on my ProAudio PP107235?
If the phone sound quality is poor on your ProAudio Receiver: * Reduce the distance between the unit and the Bluetooth device. * Move the car to a place where you can get better signal reception.
What does “PROTECTING SEND SERVICE” mean on ProAudio PP107235 Receiver?
If the message “PROTECTING SEND SERVICE” appears on your ProAudio Receiver, send the unit to the nearest service center.
Why correct characters are not displayed on ProAudio PP107235 Receiver?
This ProAudio Receiver can only display uppercase letters, numbers, and a limited number of symbols. Depending on the display language you have selected, some characters may not be displayed correctly.
To Next Page
General