ProAudio PP107235 - User Manual

40 pages

Save Page as PDF

To Next Page

Brought to market by Pana-Pacific, Inc.

PP107235 and PP107237

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

AUTORADIO NUMÉRIQUE

MODE D’EMPLOI

RECEPTOR DE MEDIOS DIGITALES

MANUAL DE INSTRUCCIONES

ProAudio

Questions and Answers

J
Joshua AndersonSep 23, 2025
What does “NO SIGNAL” mean on ProAudio PP107235?
- A
  adam55Sep 23, 2025
  If “NO SIGNAL” appears on your ProAudio Receiver, make sure the antenna is mounted outside the vehicle.
L
Laura DixonSep 23, 2025
What does “CODE ERROR” mean on my ProAudio PP107235?
- J
  johnbakerSep 23, 2025
  If “CODE ERROR” appears on your ProAudio Receiver, make sure you have entered the correct pass code.
D
David PhillipsSep 23, 2025
What does “SCAN CANCEL” mean on my ProAudio PP107235 Receiver?
- C
  christophercarrSep 23, 2025
  If “SCAN CANCEL” appears on your ProAudio Receiver, it means TuneScan has been aborted.
W
william75Aug 31, 2025
What does “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” mean on my ProAudio PP107235?
- D
  Daniel JohnsonAug 31, 2025
  If “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” appears on your ProAudio Receiver, it means your subscription is updated.
I
iwolfAug 25, 2025
What to do if my ProAudio PP107235 Receiver displays “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”?
- D
  David JohnsonAug 25, 2025
  If your ProAudio Receiver shows the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”, turn the power off. Check to be sure the terminals of the speaker wires are insulated properly, and then turn the power on again.
M
Mason ZavalaAug 25, 2025
What does “CONNECTING” mean on my ProAudio PP107235?
- M
  maciasmarkAug 26, 2025
  If “CONNECTING” appears on your ProAudio Receiver, it means: * When connected via USB: The device is connecting to the head unit; please wait. * When connected via Bluetooth: The Bluetooth is disconnected. Please check the Bluetooth connection and make sure both the device and the unit are paired and connected.
B
brooke50Aug 26, 2025
Why is the Bluetooth connection between my Bluetooth device and ProAudio PP107235 unstable?
- C
  Christian BarkerAug 26, 2025
  If the Bluetooth connection between your Bluetooth device and the ProAudio Receiver is unstable, delete the unused registered Bluetooth devices from the unit.
K
Kimberly WoodAug 27, 2025
What does “NO DEVICE” mean on my ProAudio PP107235 Receiver?
- V
  Vicki RhodesAug 27, 2025
  If the message “NO DEVICE” appears on your ProAudio Receiver, connect a device (USB/iPod/iPhone) and change the source to USB or iPod USB again.
C
Crystal WilliamsAug 27, 2025
What does “iPod ERROR” mean on my ProAudio Receiver?
- J
  Jeffrey PenaAug 27, 2025
  If “iPod ERROR” appears on the display of your ProAudio Receiver, try to reconnect the iPod. If the problem persists, reset the iPod.
H
hclarkAug 27, 2025
Why is sound being interrupted during Bluetooth playback on ProAudio Receiver?
- R
  Robert HendrixAug 28, 2025
  If the sound is being interrupted or skipped during playback of a Bluetooth audio player on your ProAudio Receiver: * Reduce the distance between the unit and the Bluetooth audio player. * Turn off, then turn on the unit and try to connect again. * Consider that other Bluetooth devices might be trying to connect to the unit.