Prodigi RDR3500 - Sending a Quick Text Message

Copyright © 2015 RCA Communications Systems
33RDR3500
TM
/ RDR3600
TM
Professional Digital Two-Way Radio Instruction Manual
Items folder without providing any indication
in the display or via sound. If the radio changes
mode or powers down before the status of the
message in Sent Items is updated, the radio
cannot complete any In-Progress messages
and automatically marks it with a Send Failed
icon. The radio supports a maximum of ve
(5) In-Progress messages at one time. During
this period, the radio cannot send any new
message and automatically marks it with a
Send Failed icon.
Sending a Quick Text Message
Your radio supports a maximum of 50 Quick
Text messages as programmed by your RCA
Communications Systems dealer. While Quick
Text messages are predened, you can edit
each message before sending it.
1. Press [ ] to access the menu.
2. Press [ or ] to navigate to Messages.
3. Press [ or ] to Quick Text and press
[ ] to select.
4. Press [
or ] to the desired Quick Text
and press [ ] to select.
5. A blinking cursor appears. Use the keypad
to edit the message, if needed. Press [ ]
to move one space to the left. Press
[ or the (#)] key to move one space to
the right. Press [* DEL] key to delete any
unwanted characters.
6. Press [ or ] button to send or store
once message is completed.
7. Select Send and press [ or ] to
the required alias or ID and press [ ] to
send the message, or press [ or ]
to Manual Dial, press [ ] button, input
subscriber ID and press [ ] button.
8. The display shows Text Message:
<Subscriber/Group Alias or ID>, conrming
your message is being sent.
9. If the message is sent successfully, a tone
sounds and the display shows Message
Sent. OR if the message cannot be sent,
a high tone sounds and the display show