44
Deleting a Nuisance Channel
If a channel continually generates unwanted
calls or noise (termed a “nuisance” channel),
you can temporarily remove the unwanted
channel from the scan list.
Note: This capability does not apply to the
channel designated as the Selected Channel.
This feature is not accessible through the
menu.
1. When your radio stops on an unwanted or
nuisance channel, press the programmed
Nuisance Channel Delete button until you
hear a tone.
2. Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Restoring a Nuisance Channel
To restore the deleted nuisance channel,
power the radio off and back on again or
press Stop and Start to restart a scan via the
programmed Scan button.
Utilities
Keypad Locked and Keypad Unlocked
(RDR3600
TM
Only)
You can lock your radio’s keypad to avoid an
inadvertent key press.
1. Press [
] to access the menu.
2. Press [ or ] to navigate to Utilities
and press [ ] to select.
3. Press [ or ] to navigate to Radio
Settings and press [ ] to select.
4. Press [ or ] to navigate to Keypad
Lock and press [ ] to select.
5. The display shows Keypad Locked and
returns to the Home screen.
To unlock the keypad, press [ ] button
then press [*DEL] button. The display shows
Keypad Unlocked and returns to the Home
screen.
To Next Page
Loading...