Need help?Do you have a question about the PROEL FLASH8A and is the answer not in the manual?
General| Type | Active Speaker |
|---|---|
| Speaker Type | 2-way |
| Power Output | 100W RMS |
| Total Power | 200W Peak |
| Max SPL | 118 dB |
| LF Driver | 8" woofer |
| Amplifier Type | Class D |
| Coverage Angle | 90° x 60° |
| Enclosure | Polypropylene |
| Speaker Size | 8 inch |
| Connectors | XLR |
| HF Driver | 1" compression driver |
Essential safety precautions for using the product, including environmental and user safety.
Details on sound pressure levels and recommended exposure times to prevent hearing damage.
Guidelines for product faults, safety, and professional service.
CE conformity, packaging, shipping procedures, and complaint handling.
Product warranty, return procedures, and installation guidelines with disclaimers.
Details on SPEAKON input/link connectors and the protection circuit.
Guidance on selecting an appropriate amplifier power rating for the FLASH8P.
Technical details and recommended cables for connecting the FLASH8P.
Illustrative diagrams showing different connection setups for the FLASH8P.
Description of connectors, GND LIFT, LINE LEVEL, MIC GAIN, and EQ LOW controls.
Details on HIGH EQ control, SIGN/LIMIT LEDs, and ON indicator.
Information on power switch, fuse holder, and AC power socket for safe operation.
Pinout and wiring for XLR and Jack inputs/outputs on the FLASH8A.
Diagrams illustrating various connection configurations for the FLASH8A.
Steps to diagnose and resolve issues like no power, no sound, and distorted audio.
Troubleshooting for high-frequency shut-off, level reduction, and hum/noise problems.
Graphical representation of speaker directivity and frequency response characteristics.
To Next Page
