Why do my PROEL Speakers have distorted sound?
If the PROEL Speakers are producing distorted sound, it might be due to a high input signal level. Try turning down your level controls to resolve this issue.
What to do if my PROEL Speakers have no sound?
If your PROEL Speakers have no sound, ensure the input LEVEL control for the channel is turned up. Also, check your signal level; it might be too low. Inspect the signal cable, mixer, and other equipment settings and cabling. You can also use a cable tester or replace the cable to ensure it is working.
How to fix noise or hum in PROEL Speakers?
If you are experiencing noise or hum with your PROEL Speakers, try enabling the GND LIFT button on the rear panel. You can also press all GND LIFT buttons for all system's amplifiers. Whenever possible, use balanced cables, as unbalanced lines may result in noise over long cable runs. Sometimes, plugging all audio equipment into the same AC circuit helps, so they share a common ground.
How to troubleshoot no power on PROEL Speakers?
If your PROEL Speakers have no power, ensure the mains AC outlet is live by checking with a tester or a lamp. Also, make sure the mains plug is securely plugged into the mains AC outlet.
What to do if PROEL Speakers have different channel levels?
To address different channel levels in PROEL Speakers, check if you are using a balanced cable for one channel and an unbalanced one for the other. Also, ensure that your loudspeaker system is fully connected and both loudspeakers have the same impedance.
Details the audio frequency range covered by the loudspeakers, presented graphically.
Adjustable speaker pole for separation with terminal pieces Ø 35 mm, featuring a bolt locking mechanism.
Professional aluminium floor-stand for speakers with terminal pieces Ø 35mm and a screw locking system.
C-shape metal bracket for wall mounting with +/- 45° free rotation.
Adjustable metal bracket for wall mount, with specific steps for vertical and horizontal aiming.
Single aluminium coupler for 50mm truss with M12 bolt, used in conjunction with KPTV.
Heavy duty protective covers designed for carrying the speakers.
Guidance on what to do if the product malfunctions or is damaged, specifying service requirements.
Provides solutions for common issues such as no power, no sound, distorted sound, and noise.
Instructions for controlling unit conditions upon unpacking and procedures for handling shipping damage.
Details the product warranty period, coverage limitations, and the procedure for returns and repairs.
Guidelines for proper installation, usage disclaimers, and responsibilities for product use.
Instructions for cleaning, ventilation checks, fuse replacement, and connecting to power.
General| On/off switch | Yes |
|---|---|
| Product color | Black |
| LED indicators | Power |
| Housing material | Polypropylene (PP) |
| Recommended usage | Universal |
| Multi-Room Streaming (MRS) support | - |
| Speaker type | 2-way |
| Speaker position | Front |
| Number of drivers | 1 |
| Speaker placement | Floor |
| Audio output channels | 1.0 channels |
| Woofer diameter (imperial) | 15 \ |
| Subwoofer driver diameter (imperial) | 1 \ |
| Amplifier class | D |
| Amplifier output power | 250 W |
| Voice coil diameter | 63.5 mm |
| Impedance | 30 Ω |
| Frequency range | 45 - 20000 Hz |
| RMS rated power | 600 W |
| Connectivity technology | Wired |
| AC input voltage | 230 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 300 W |
Weight and Dimensions| Depth | 400 mm |
|---|---|
| Width | 440 mm |
| Height | 712 mm |
| Weight | 18000 g |
To Next Page