EasyManua.ls Logo

PROEL EIKON series User Manual

PROEL EIKON series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EIKON series
Studio Monitors
USER’S MANUAL
ENGLISH
ITALIANO
96MAN00118-R EV.30/15
Question and Answer IconNeed help?

Do you have a question about the PROEL EIKON series and is the answer not in the manual?

PROEL EIKON series Specifications

General IconGeneral
Crossover frequency2.2 kHz
Power Handling (RMS)300 W
TypePassive speaker
System type2-way
Nominal impedance8 ohm
Connectors2 x SPEAKON

Summary

General Safety and Handling

Disposal of Electrical Equipment

Instructions for responsible disposal of old electrical and electronic equipment.

General Safety Instructions

Essential safety precautions to follow when using the product.

Fault and Troubleshooting

Guidance on what to do in case of product fault or damage.

Packaging and Shipping

Information regarding packaging integrity, shipping, and complaints.

Warranty and Returns

Details on the product warranty period and return procedures.

Maintenance and Disclaimers

Guidelines for maintenance, disclaimers, and product liability.

Power Supply Requirements

Instructions for connecting the apparatus to the correct power source.

CE Conformity

Statement of product compliance with relevant EU directives.

EIKON Series Introduction and Description

Introduction

Welcome message and overview of PROEL's brand values and product quality.

Product Description

Details the EIKON series as nearfield studio monitors designed for accurate audio.

EIKON 5, 6, 8 Input Panel

Line Input Connectors

Description of XLR, JACK, and RCA connectors for line level input.

HF Level Adjust Control

Control for fine adjustment of high frequency response.

Level and Status Indicators

Controls for signal level and the ON status indicator LED.

EIKON 10S Input and Controls

Input Connectors (L/R)

Details on XLR and JACK input connectors for left and right channels.

Output Connectors (L/R)

Description of XLR output connectors for filtered or unfiltered signals.

Subwoofer Controls

Controls for LO-CUT, LINK OUTPUT, HI-CUT, PHASE, and LEVEL for the subwoofer.

Subwoofer Status Indicator

RED LED indicator for the subwoofer's ON status.

EIKON Mains Panel

Power Switch and AC Socket

Location and use of the power ON/OFF switch and AC power input socket.

Fuse Holder and Voltage Selector

Details on the fuse holder, replacement, and voltage selection.

Setup and Configuration

Basic Stereo Setup

Guidance on optimal placement and aiming for stereo monitoring.

Stereo Setup with Subwoofer

Instructions for integrating the EIKON 10S subwoofer into a stereo system.

5.1 Surround Setup

Information on 5.1 configuration and speaker placement according to ITU-R BS.775.

Bass Management Explained

Explanation of bass management in home-theater systems and its impact.

5.1 Bass Management System

Settings and recommendations for using bass management with EIKON monitors.

Technical Specifications

EIKON 5, 6, 8 Monitor Specs

Detailed technical specifications for EIKON 5, 6, and 8 studio monitors.

EIKON 10S Subwoofer Specs

Detailed technical specifications for the EIKON 10S subwoofer.

Dimensions

EIKON Monitor and Subwoofer Dimensions

Visual representation and measurements of EIKON monitors and subwoofer.

Accessories

Speaker Stands (KP Series)

Specifications for PROEL KP820, KP840, KP845, and KP860 speaker stands.

ISOBLOK Monitor Isolators

Information on PROEL ISOBLOK monitor isolators for vibration damping.

Related product manuals