ProForm 310 Re Elliptical User Manual

6
1.
While a second person lifts the rear of the
Frame (1), attach the Rear Stabilizer (70) to the
Frame with two M10 x 85mm Patch Screws
(82). Tip: Start both Patch Scews before
tightening them.
2. Orient the Front Stabilizer (73) so that the
“Front” sticker is facing away from the front of
the Frame (1).
While a second person lifts the front of the
Frame (1), attach the Front Stabilizer (73) to the
Frame with two M10 x 85mm Patch Screws
(82).
70
82
1
1
2
1
To make assembly easier, read the infor-
mation on page 5 before you begin.
82
73

ProForm 310 Re Elliptical Specifications

General

Brand	ProForm
Model	310 Re Elliptical
Category	Elliptical Trainer
Language	English