EasyManua.ls Logo

ProForm PFTL58007.1 - User Manual

ProForm PFTL58007.1
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Serial
Number
Decal
M
odel No. PFTL58007.1
Serial No.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER’S MANUAL
Write the serial number in the
space above for future reference.
With Universal Dock for iPod
®
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete cus-
tomer satisfaction. If you have
questions, or if parts are missing,
PLEASE DO NOT CONTACT
THE STORE; please contact
Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
www.proformservice.com
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
V

Table of Contents

Questions and Answers

  • J
    Jesus GuerreroAug 11, 2025
    How to fix a ProForm Treadmill that won't turn on?
    • J
      Justin SmithAug 11, 2025
      If the power to your ProForm Treadmill does not turn on, make sure the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet. Use only a single-outlet surge suppressor that meets all of the specifications. The treadmill is not compatible with GFCI-equipped outlets. Also, ensure that the key is inserted into the console after plugging in the power cord. Check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes, the circuit breaker has tripped. To reset it, wait five minutes and then press the switch back in.
  • J
    Julie CummingsAug 15, 2025
    What to do if my ProForm Treadmill power turns off during use?
    • B
      Brandi KaneAug 15, 2025
      If your ProForm Treadmill turns off during use, check the reset/off circuit breaker. If it has tripped, wait five minutes, then press the switch back in. Ensure the power cord is plugged in; if it is, unplug it, wait five minutes, and plug it back in. Also, remove and reinsert the key from the console.
  • A
    Ashley HartAug 21, 2025
    How to recalibrate the incline on a ProForm PFTL58007.1 Treadmill?
    • C
      chelseabryantAug 21, 2025
      If the incline of your ProForm Treadmill does not change correctly, insert the key into the console and press one of the Incline buttons. While the incline is changing, remove the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level, recalibrating the incline system.
  • M
    marymooreAug 30, 2025
    Why does my ProForm PFTL58007.1 Treadmill walking belt slow down when I walk on it?
    • E
      erikariveraAug 30, 2025
      If your ProForm Treadmill slows down when you walk on it, ensure you're using a single-outlet surge suppressor that meets the specifications. If the walking belt is overtightened, remove the key and unplug the power cord. Then, use the hex key to turn both rear roller bolts counterclockwise 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 2 to 3 inches off the walking platform. Keep the walking belt centered. Plug the power cord back in, insert the key, and run the treadmill for a few minutes. Repeat this process until the walking belt is properly tightened.
  • K
    kevinsanfordSep 4, 2025
    Why do the console displays stay on when I remove the key from my ProForm Treadmill?
    • S
      Sarah CruzSep 4, 2025
      If the console displays on your ProForm Treadmill remain lit after removing the key, the display demo mode is likely activated. This mode is intended for use when the treadmill is displayed in a store. To deactivate it, press and hold the Stop button for a few seconds.
  • T
    Tyler CampbellNov 24, 2025
    What to do if the walking belt is off-center or slips on my ProForm PFTL58007.1?
    • B
      Betty ThomasNov 24, 2025
      If your ProForm Treadmill's walking belt is off-center, remove the key and unplug the power cord. If the belt has shifted left, turn the left rear roller bolt clockwise 1/2 turn with the hex key. If it has shifted right, turn the bolt counterclockwise 1/2 turn. Avoid overtightening. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until centered. If the walking belt slips when walked on, remove the key and unplug the power cord. Turn both rear roller bolts clockwise 1/4 turn with the hex key. You should be able to lift each edge of the belt 2 to 3 inches off the platform when correctly tightened. Keep the belt centered. Plug the power cord back in, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the belt is properly...

ProForm PFTL58007.1 Specifications

General IconGeneral
BrandProForm
ModelPFTL58007.1
CategoryTreadmill
LanguageEnglish

Related product manuals