6
TH
STEP: DISCONNECT SCANNER
DISCONNECT SCANNER FROM THE
CONNECTIVITY DEVICE
Use the scanner
to scan the pairing
code of a different
Gateway.
RESULT
Scanner is disconnected from the Gateway and is
connected to a new Gateway.
Place the
scanner in the
Charging Station.
RESULT
The scanner is disconnected from Gateway and can be
connected to a new one.
Unplug
connection cable
from the Micro
USB port.
DISCONNECT THE CONNECTION CABLE
FROM THE GATEWAY:
RESULT
The LED of the Gateway no longer lights up green.
The connection cable is disconnected from the
Gateway.
To Next Page
