GATEWAY - DATA TRANSFER
PROBLEM CAUSE SOLUTION
Barcode data is not transferred. Scanner is not connected to the
Gateway.
1. Scan the pairing barcode on the Gateway.
2. Lights up blue twice briefly while scanner is
connecting and after a successful connection.
Scanner is out of range of the
Gateway.
(Maximum range is 100 - 130 ft.
(30 - 40m))
Bring scanner closer to the Gateway.
Gateway is defective. Gateway must be replaced.
More detailed information can be found at
proglove.com/support.
Scanner is defective. Scanner must be replaced.
More detailed information can be found at
proglove.com/support.
To Next Page
