Project Source 0877823 - Connecting Water Lines and Discharge Tube

7
ASSEMBLY INSTRUCTIONS
9. Attach the weight (K) to cover the weight
locator label (J) on the spray hose (L).Use a
Phillips screwdriver to secure.
10. Turn on water supply.
OPERATING INSTRUCTIONS
1. Remove spray head (A) from faucet body (B).
9
1
To spout
1
10
1
2
9
10
1
9-1
2
9-2
Locate here
1-1
1
L
J
K
K
B
A
6
ASSEMBLY INSTRUCTIONS
7. Remove cap from discharge tube (D).
8. Attach quick connector (M) to discharge tube
(D). Pull down on quick connector (M) to
ensure it is secure.
NOTE: For removal, see “Quick Connector
Removal.”
6. Connect water supply lines (C) and tighten
water supply nuts using two wrenches.
6
1
1
7
8
1
6
7
8
6-1
2
2
8-1
2
8-2
3
C
D
D
M