EasyManuals Logo

Projecta IC1500L User Manual

Projecta IC1500L
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
FAULT CODES
Error Codes may appear and these are:
Remote
LCD
Power
(Red LED)
Charging
(Blue LED)
Full
(Green LED)
Fault
Remedy
Err __ __ __
(Slow Flash)
OFF OFF Short circuit or
reverse connection
of the clips.
Check clips are not
touching each other
OR
Check the clips are
correctly connected
to the battery.
F01 – – – – – –
(Fast Flash)
OFF ON Bulk charging has
timed out and stopped
after 10 hours.
Battery may be faulty.
F02 – – – – – –
(Fast Flash)
– – – – – –
(Fast Flash)
OFF Soft Start has timed
out as the battery has
not reached 10.0V
after 2 hours.
Battery may be faulty,
check the battery or try
and charge again.
F03 – – – – – –
(Fast Flash)
ON – – – – – –
(Fast Flash)
Absorption has been
charging for more
than 20 hours and is
now in float mode.
Battery may be faulty or
there could be a load on
the battery.
CLd Battery Temp is less
then 0°C. Charging at
reduced current.
To protect the battery.
Warm the battery up.
HtC Battery Temp is greater
than 45°C the charger
voltage is reducing, to
protect the battery.
Cool the battery down.
OTP The charger has
overheated (>70°C)
and has switched off.
Ensure adequate
ventilation around the
charger.
OCP The charger has
encountered an error.
Contact Brown & Watson
International.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Projecta IC1500L and is the answer not in the manual?

Projecta IC1500L Specifications

General IconGeneral
BrandProjecta
ModelIC1500L
CategoryBattery Charger
LanguageEnglish

Related product manuals