EasyManua.ls Logo

Projecta IC2500 - Advanced Modes and Control; Recondition Mode and Remote Control Locking

Projecta IC2500
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
INITIATING RECONDITION MODE
Thereconditionmodecanrestorebatteriesfromadeeplydischargedstateby
equalisingthecells(equalisationcharge)ensuringtheyareoperatingatfullcapacity.
Areconditionchargeshouldbeperformedperiodicallytooptimisethebattery’shealth
and performance.
STEP 1
FollowSTEPS1to6ofthe“ChargingInstructions”ofthisbooklet.
Ensurethebatteryisremovedfromthevehicletopreventthebattery’selectrolyte
fromspillingoveranddamagingthecarorenginebay.
STEP 2 – PRESS THE RECONDITION BUTTON
Thechargerwillbeinthismodefor4hours.DuringreconditiontheLCDscreenwill
displayrapidhorizontallines.Uponcompletionoftherecondition,thechargerwill
proceed to carry out a normal charge on the battery.
STEP 3
FollowSTEPS7to9oftheChargingInstructionsofthisbooklet.
LOCKING THE REMOTE CONTROL
LockingtheremotecontrolwilldisabletheCHARGE,BATTYPE&RECONkeysfrom
use.Thisfunctionisidealforhirevehiclesetcasitpreventsthechargerssettingsfrom
beingalteredifthekeysaretouched.WhenlockedtheVOLT/AMPkeywillstillworkto
displaythevoltsoramps.
Tolock;pressandholdthe‘CHARGE’and‘BATTYPE’keysfor3secondsuntilyouhear
abeep.Thisindicatesthekeysarenowlocked.
Tounlock;pressandholdand‘CHARGE’and‘BATTYPE’keysfor3secondsuntilyou
hearanotherbeep.Thisindicatesthekeysarenowunlocked.

Related product manuals