5
DIAMOND19
Electronics
• Color LCD display with high resolution for simplied access to control menu, conguration and DMX
addressing
• Menu language: English, French, Spanish
• 4 DMX congurations available: 16/17/18/30 channels for full exibility and control (preliminary)
• 2,4GHz WDMX receiver by Wireless Solutions (optional)
• Input and output signal through 3p and 5p XLR connectors
• RDM ready to set DMX Address, Display Flip, X/Y Reverse and more settings
• RDM monitors Voltage, Current, Power Consumption Of Lamp
• Firmware Upgrade Via DMX
• Hibernation When Lost DMX For Preset Time
• Advanced diagnostic system for all PCBs, with thermal and fan rotation control
• “ENERGY SAVE” mode: 50% reduction of power consumption during blackout status
• Remote unit reset by DMX
• Fixture life timer
• Temperature indication of base, arm, head
• Battery backup for user operation without connecting to the main
Structure and moving body
• Internal protection: IP20
• New cutting-edge liquid cooling system, which allows a better temperature management of LED
board to deliver higher output
• Cooling: forced ventilation with low-noise fans, no heat generation
• Power cable (shuko 1,5mt) included
• Motion Angle: Pan = 630° (2,20 sec) Tilt = 265° (0,85 sec)
• Pan/Tilt resolution: 8-bit or 16-bit:
• Pan = 2,47° Pan Fine = 0,009° Tilt = 1,03° Tilt Fine = 0,004°
• Suspension and xing: any possible working position through “quick lock” omega brackets (included)
Power supply
• Power supply: 100-240V 50/60Hz
• Connections: PowerCON IN/OUT
• Power output allowing up to 6 units to be connected on a single power line (at 230V)
• Max power consumption: 316W
Weight and dimensions
• Weight: 11 kg
• Dimensions (WxHxD): 338x235x430mm
To Next Page
Loading...