Catalytic cleaning
The removable side panels are coated with a catalytic enamel.
During cooking circulating air in the oven will deposit oil and fat
splashes. Where oily liquids have been spilt, self-cleaning action will
not be sufficient. It is recommended to run the oven at 240°C for
one hour. Wait for the oven to cool down and wipe again with a
damp cloth.
If using oven sprays on the oven cavity surface, the catalytic panels
must first be removed from the oven. To remove them, unscrew
the screw and then pull them away from the oven.
Note that with catalytic cleaning, the cavity will not be fully cleaned:
you will have to clean the enameled parts as well as the oven door
glass yourself.
Warning: Under such conditions, the surfaces
be kept away.
may get hotter than usual and children should
Replacing the oven light bulb
WARNING: Ensure that the appliance is
switched off before replacing the lamp to
The bulb is located inside the oven on the back wall.
1. Rotate the lamp cover to remove.
2. Unscrew and replace the bulb with a new one
suitable for high temperatures (300°C) with the
following specifications: 2 0V, 25W. 3 G9
3.
Twist
the lamp cover
back on
.
avoid the possibility of electric shock.
Replaceable light source by a professional
This product contains a light source of energy efficiency class G.
To Next Page
Loading...
Need help?
General
