Downloaded from www.vandenborre.be
7
Press the button to activate the sleep function and an arrow on the remote display will point to
.
In COOL and DEHUMIDIFICATION modes, the setting temperature will increase by 1 degree after 1 hour and increase
a further 1 degree after 2 hours.
To cancel the function, press the button again. The arrow pointing to
will disappear on the remote display.
: TIMER ON/OFF button
The timer can be set to start or stop the air conditioner at any time within a range of 0.5 to 24 hours.
To turn the unit automatically off (power on mode):
1. Press the button on the remote.
• An arrow on the remote control display will point to
.
Now the time can be set by repeatedly pressing
+/– until the desired time is set.
2. Press the button to confirm the setting.
To turn the unit automatically on (power off mode):
1. Press the button on the remote.
• An arrow on the remote control display will point to
.
Now the time can be set by repeatedly pressing
+/– until the desired time is set.
2. Press the button to confirm the setting.
LOCK FUNCTION
Press
+ and – at the same time to lock or unlock the buttons on the remote control.
In the lock status, all buttons are disabled.
To unlock the buttons, press
+ and – at the same time again.
REGULATING THE AIRFLOW DIRECTION
Adjust the bar on the vertical louvers to control the air flow direction of the vertical louvers.
Move the horizontal louvers directly to control the air flow direction of the horizontal louvers.
INSTALLATION
Installation for the exhaust hose
1. Connect the provided accessories as shown.
A. Exhaust adapter for the unit
B. Exhaust hose
C. Bushing
D. Exhaust adapter outlet
To Next Page
Loading...
Need help?
General
