ProMinent Sigma X Supplementary Instructions

3.4 Using the metering monitor
The "Metering monitor" socket must be assigned to use the metering mon‐
itor in PROFIBUS
®
operation. The pump then transmits
‘available’ for the
"Flow" status bit. The metering monitor can be switched on and off via the
PROFIBUS
®
using the
‘Flow control’ parameter - see “Operation” chapter.
Special features in active PROFIBUS
®
operation
7

ProMinent Sigma X Specifications

General

Brand	ProMinent
Model	Sigma X
Category	Water Pump
Language	English