To Next PageTo Next PageWhat to do if ProMinent Water Pump does not prime?
If your ProMinent Water Pump isn't priming even with a full stroke and after bleeding, it could be due to minor crystalline deposits on the ball seat from the valves drying out. Try taking the suction hose out of the storage tank and thoroughly flushing out the liquid end. If the issue persists, heavy crystalline deposits might be the cause. In that case, dismantle the valves and clean them.
General| Protection class | IP65 |
|---|---|
| Pressure | Adjustable |
| Power Supply | 230V AC, 50/60Hz |
| Material | PVDF, PP |
| Stroke length | Adjustable |
| Max Pressure | 10 bar |
| Control Options | Manual, external control |
| Materials in Contact with Fluid | PVDF, ECTFE, PP |
| Operating Temperature Range | -10°C to +40°C |
| Applications | Water treatment |
| Dosing Accuracy | ±2% |
Defines the approved applications and limitations of the pump.
Provides guidelines for connecting the pump's hydraulic system.
Covers the necessary electrical connections for pump operation.
Crucial safety warnings before initial pump operation.
Lists and explains error messages displayed by the pump.
Details warning indicators and their causes.
