22 Declaration of Conformity for Machinery
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
n ProMinent GmbH
n Im Schuhmachergewann 5 - 11
n D - 69123 Heidelberg, Germany,
hereby declare that the product specified in the following, complies with
the relevant basic health and safety requirements of the Directive, on the
basis of its functional concept and design and in the version distributed by
us.
Any modification to the product not approved by us will invalidate this dec‐
laration.
Tab. 24: Excerpt from the Declaration of Conformity
Designation of the product: Metering pump, Sigma product range
Product type: S1Cb...
Serial number: see nameplate on the unit
Relevant directives: Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive (2014/30/EU)
according to Appendix I, No. 1.5.1 of the Machinery Directive
EMC Directive (2014/30/EU)
Harmonised standards applied, in
particular:
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
EN 61010-1:2010
EN 61000-6-2:2005 + AC:2005
EN 61000-6-4:2007 + A1:2011
Date: 20.06.2016
You can download the Declaration of Conformity at www.prominent.com.
Declaration of Conformity for Machinery
107
To Next Page
Loading...
Need help?
General
