To Next PageTo Next PageWhat to do if ProMinent Water Pump does not prime?
If your ProMinent Water Pump isn't priming even with a full stroke and after bleeding, it could be due to minor crystalline deposits on the ball seat from the valves drying out. Try taking the suction hose out of the storage tank and thoroughly flushing out the liquid end. If the issue persists, heavy crystalline deposits might be the cause. In that case, dismantle the valves and clean them.
General| Power consumption | See specific model data sheet |
|---|---|
| Protection class | IP65 |
| Housing Material | PP |
| Diaphragm Material | PTFE |
| Valve Material | Ceramic |
| Relative Humidity | Up to 95% non-condensing |
| Materials in contact with the medium | Ceramic, PTFE |
| Power Supply | 230 V AC, 50/60 Hz |
Specifies the approved applications and limitations for the metering pump.
Details the various control elements and their primary functions.
Outlines the different modes for pump operation and available functions.
Procedures for hydraulic, electrical installation, and initial setup.
Routine checks and tasks to ensure pump longevity and performance.
Guide to diagnosing and resolving operational faults and errors using log book data.
Key operational data, material compatibility, and environmental requirements.
Details on electrical connections, protection ratings, and safety standards.
Visual representations of the pump and its components with key dimensions and part breakdowns.
Information on common wear parts and spare parts kits for maintenance.
A detailed hierarchical view of all available menu options and settings for configuration.
