ProMinent S3Cb - Events in the Log Book

Message no. Description
57 The pump is blocked and is not running
58 Missing or defective hall sensor
59 Shut-down in the event of overpressure, slow
60 Shut-down in the event of overpressure, fast
- Missing data stored in the CTRL in the HMI
- The data coming from the CTRL is faulty
14.5.3 Events in the log book
Message no. Description
4 The stroke length was adjusted by more than 5%
8 Calibration was performed
9 The pump was started or stopped by the HMI
13 The timer has performed a timer program step
Troubleshooting
82