PROPAIN HUGENE - Inspection and Service

1. Secure or cover all loose or moving parts properly. Sharp or pointed components have to be wrapped additionally to make sure they won’t damage other parts of your bike and won’t tear through
the outer packaging.
2. Remove the front wheel for shipping and wrap the front wheel in a cardboard box.
3. Screw the thru axles into the dropouts.
4. Position the cardboard box at the rear on the drive side.
5. Protect the top tube from damages through the handlebar by using appropriate material (e.g. foam tubing).
ǦȘ INSPECTION AND SERVICE
DANGER
RISK OF ACCIDENT DUE TO OVERDUE MAINTENANCE AND SERVICE!
ìÐĊĊÐæăÐÆĴðĊæðĊĮĨÐÆĴðďĊĊÌĮÐīŒðÆðĊæșœďīĊÆďĉĨďĊÐĊĴĮĉřÆķĮÐÆÆðÌÐĊĴĮȘ
• The service and inspection works and intervals mentioned in this user manual must be observed.
• Compliance with the maintenance and inspection activities and intervals is a prerequisite for maintaining warranty claims..
ZĊăřīÐæķăīĮÐīŒðÆÐĊÌÆīÐœðăăÐĊĮķīÐĴìĴăăĨīĴĮďåĴìÐÅðāÐåķĊÆĴðďĊĨīďĨÐīăřȘďķĮìďķăÌÆīīřďķĴÐĮřÆăÐĊðĊæșÆīÐĊÌðĊĮĨÐÆĴðďĊĴĮāĮřďķīĮÐăåīÐæķăīăřȧĮÐÐȴǥȘÐåďīÐĊÌåĴÐīřďķīīðÌÐȵȨȘ
}ìÐĊÐÆÐĮĮīřĮÐīŒðÆÐĊÌðĊĮĨÐÆĴðďĊœďīāĮĉķĮĴÅÐÆīīðÐÌďķĴÅřqtZqAUďīÅřĨÐīĮďĊœðĴìĴìÐĊÐÆÐĮĮīřĪķăðťÆĴðďĊĮșÌÐĨÐĊÌðĊæďĊĴìÐĮÐīŒðÆÐðĊĴÐīŒăȘ
All information on inspection and service can also be found at www.propain-bikes.com.