PROPAIN HUGENE - 7.3 TORQUES

ǦȘǢ TORQUES
All screw connections must be tightened with an appropriate torque wrench. Proper use prevents overtightening and breaking of the bolts.
}ìÐĴďīĪķÐĮðĊÌðÆĴÐÌÅÐăďœīÐåďīķĊăķÅīðÆĴÐÌĴìīÐÌĮȘOķÅīðÆĴðďĊååÐÆĴĮĴìÐåīðÆĴðďĊÆďÐŨÆðÐĊĴșĮďĴìĴřďķĊÐÐÌĴďÆìďďĮÐăďœÐīĴďīĪķÐåďīăķÅīðÆĴÐÌÅďăĴĮȘ
The following table shows all necessary torques for your bike.
COMPONENTS TU9}t'tșTZ#'O TORQUE
seat clamp all see lasered torque*
seat post clamp all see lasered torque*
caliper mount front and rear wheel all 6 Nm
front wheel axle all ĮÐÐĉĊķåÆĴķīÐīȾĮĮĨÐÆðťÆĴðďĊĮ
rear wheel axle PROPAIN 12 Nm
lockring cassette all 40 Nm
ťŘðĊæĮÆīÐœīÐīÌÐīðăăÐķī all 10 Nm
ťŘðĊæĮÆīÐœĮÅīāÐīďĴďīĮ all 6.2 Nm
Lockring Center Lock brake rotors all 40 Nm
ťŘðĊæĮÆīÐœÆīĊā all see lasered torque
Pedals all 35 Nm
Handlebar control elements all
see lasered torque*
also observe the instructions of the handlebar manufacturer!
stem handlebar clamp all see lasered torque*
stem steerer clamp all see lasered torque*
Pivot points rear end PROPAIN see assembly instructions
// USER MANUAL