PROPAIN HUGENE - MOUNTING THE REAR WHEEL

2
4
1
2
1
5
3
// MOUNTING THE REAR WHEEL
1. Remove the thru axle from the frame.
2. tÐĉďŒÐĴìÐĴīĊĮĨďīĴĮÐÆķīðĊæÌÐŒðÆÐĴìĴðĮťĴĴÐÌ
between the brake pads.
3. Store the transport securing device for future transport
of your bike.
1. Insert the rear wheel into the dropout of the frame.
ĺ The brake rotor must be placed between the brake
pads.
ĺ Put the chain on the smallest sprocket of the
cassette.
2. Slide the thru axle from the brake side (left in the
direction of travel) into the frame dropout and hub of
the wheel.
Screw the thru axle into the dropout using a 6 mm hex key
and tighten the thru axle to a torque of 12 Nm.
Activate the Cage Lock function. Pull the cage of the rear
derailleur forward and press the Cage Lock button with the
symbol .
ĺ The rear derailleur cage remains tilted forward when
the Cage Lock function is activated.
}ìðĮĮðĉĨăðťÐĮĴìÐ
installation of the rear wheel.
Deactivate the Cage Lock function. Pull the cage of the
derailleur slightly forward and carefully return the derailleur
to its original position.