PROPOINT 8561110 - Page 29

Vl.O
34° Clipped Head Framing Nailer
8561110
PROBLEMS POSSIBLE CORRECTIVE
CAUSE(S)
ACTION
Tool runs slow 1. Tool not 1. Lubricate nailer.
or has loss lubricated
of power. sufficiently.
2. Broken
2. Replace spring.
spring in
cylinder cap.
3. Exhaust port 3. Replace damaged
m cap internal parts.
is blocked.
Fasteners are 1. Guide on 1. Replace guide .
jammed driver is worn .
in tool.
2. Fasteners are 2. Use only
not correct size. recommended
fasteners.
3. Fasteners 3. Replace with
are bent. undamaged
fasteners.
4.
Magazine or 4. Tighten screws.
nose screws
are loose .
5. Driver 5. Replace driver .
is
damaged .
Air leaking 1. Loose screws. 1. Tighten screws.
between
2. Damaged 2. Replace gasket.
housing
gasket.
and cap.
Visit www.princessauto.com for more information
29