PROPOINT 8561110 - Page 9

Vl.O
34° Clipped Head Framing Nailer
8561110
17. Do not touch the trigger unless driving fasteners.
Never attach air line to tool or carry tool while
touching the trigger. The tool could eject a fastener
which will result in death or serious personal injury.
Also actuate the trigger lock to the safe position
when not in use.
18. Always fit tool with a fitting or hose coupling on or
near the tool in such a manner that all compressed
air in the tool is discharged at the time the fitting or
hose coupling is disconnected. Do not use a check
valve or any other fitting which allows air to remain
in the tool. Death or serious personal injury
could occur.
19. Never place hands or any other body parts in the
fastener discharge area of the tool. The tool might
eject a fastener and could result in death or serious
personal injury.
20. Never carry the tool by the air hose or pull the hose
to move the tool or a compressor. Keep hoses away
from heat, oil and sharp edges. Replace any hose
that is damaged, weak or worn. Personal injury or
tool damage could occur.
21. Always assume the tool contains fasteners. Respect
the tool as a working implement; no horseplay.
22. Always keep others at a safe distance from the
work area in case of accidental discharge of
fasteners. Do not point the tool toward yourself or
anyone whether it contains fasteners or not.
Accidental triggering of the tool could result in
death or serious personal injury.
Visit www.princessauto.com for more information
9