To Next Page
R
Robin WagnerJul 27, 2025
How to fix Prorelax Medical Equipment that does not turn on?
- BBrandon SwansonJul 27, 2025
If your Prorelax Medical Equipment doesn't turn on, the cause might be a depleted or faulty battery. Try replacing the battery.
How to fix Prorelax Medical Equipment that does not turn on?
If your Prorelax Medical Equipment doesn't turn on, the cause might be a depleted or faulty battery. Try replacing the battery.
What to do if Prorelax Medical Equipment turns on, but does not generate electric pulses?
If your Prorelax Medical Equipment turns on but doesn't generate electric pulses, it could be due to several reasons: * A broken cable: Replace the cable. * Improperly connected cable: Ensure the cable is correctly connected. * Expired treatment time: Turn the unit off and then back on.
Why does Prorelax Medical Equipment turn on and then off again?
If your Prorelax Medical Equipment turns on and then immediately shuts off, it could be due to: 1. The battery not being properly inserted. Try reinserting the battery or replacing it. 2. The battery life has expired. In this case, replace the battery.
General| Channels | 2 |
|---|---|
| Portability | Portable |
| Display | LCD |
| Type | TENS/EMS |
| Power Source | Battery |
| Programs | Pre-set |
| Timer | Yes |
| Safety Features | Automatic shut-off |
| Usage | Pain relief, muscle stimulation |
Explains the intended use of the TENS+EMS SUPER DUO system for pain relief and muscle building.
Lists critical safety warnings and precautions for using the device, including placement and contraindications.
Details how to properly prepare the skin for electrode placement to ensure effective treatment and prevent irritation.
Explains how to connect the lead wires to the electrodes before applying them to the skin.
Guides users on how to insert or replace the AAA batteries in the device, including important safety precautions.
Illustrates correct electrode placement for TENS therapy on various body parts for pain relief.
Illustrates correct electrode placement for EMS therapy on various body parts for muscle stimulation.
Explains the procedure for turning the TENS+EMS device on and off.
Describes how to choose between TENS and EMS modes and select specific treatment programs.
Details the 8 preset TENS programs, their pulse widths, rates, and waveform types, along with usage advice.
Details the 8 preset EMS programs, their pulse widths, ramp times, and function modes, along with usage advice.
Explains how to set and save the desired treatment duration for the device.
Guides users on how to adjust the stimulation intensity for optimal comfort and effectiveness.
Provides instructions on how to clean and maintain the main stimulator unit safely.
Gives guidance on disconnecting, handling, and storing the device's cables.
Explains the disposable nature of electrode pads and when to replace them.
Offers advice on storing the device properly when not in use.
Addresses the device's compliance with electromagnetic compatibility standards and recommendations for its use.
Provides guidance on electromagnetic immunity levels and the recommended environment for device operation.
Advises on maintaining safe distances from RF equipment to prevent interference with the device.
