ProScan PDVD1034 - Page 18

Setting Menu
IN SPEAKER SETUP PAGE:
If Speaker Setup is selected, press the button,thesub-settingmenuwillappear.
1. IfDownmixisselected,usethe Direction and buttonssetittoLt/Rt;Stereo.
• IfsettoLt/Rt,therearleftorrearrightchannelswillplayonbothLeftandRight
Speakers.
• IfsettoStereo,therearleftchannelwillplayonleftspeaker;therearrightchannelwill
play on right speaker.
IN DOLBY DIGITAL SETUP PAGE:
1. If Dual Mono is selected, use the Direction and button to set it to Stereo, 
L-Mono

(Play Left channel on all speakers), R-Mono (Play Right channel

on

all
speakers) or Mix-
Mono (Mixed Right and Leftchannelthenplaysonallspeakers)
asdesired.(Functions
dependontherecordingofthedisc).
2. If Dynamic is selected, use the Direction and
desired or turn it off.
ENTER
ENTER
ENTER
ENTER
button to set the dynamic level
as
18
2015.09.25
08:30:41
+08'00'