ProScan PDVD1034 - Operation; Main Unit Basic Operation; Secondary Unit Basic Operation

1. Recharge or connect the unit to AC/DC Adaptor/ Car Adaptor as previous procedure.
3. Insert the disc to the center spindle with label side face up and close the lid.
4. Power on the unit by sliding the POWER ON/OFFswitchontherearofunittotheON
position.Thegreenindicatorwillturnonandtheunitwillstartplaybackautomatically.
5. Forprivatelistening,insertheadphonesintothephonejack.Theexternalspeakerswill
disconnect automatically.
6. Tosavebatterypowerwhilelisteningtomusic,presstheDISPLAY ON/OFF
turnOFF.PressagaintoturnitbackON.
7. Topoweroff,slidethePOWER ON/OFFswitchtotheOFFposition.
SECONDARY UNIT:
1. Connect the secondary unit to the main unit by the supplied DC and AV connection
cables as previous procedures.
2. Slide the POWER ON/OFFswitchontherightsideofunittotheONpositiontopower
on the secondary unit.
4. Forprivatelistening,inserttheheadphonesintothephonejack.Thespeakerswill
disconnect automatically.
5. Tosavebatterypowerwhilelisteningtomusic,presstheDISPLAY ON/OFF button to
turnOFF.PressagaintoturnitbackON.
6. Topoweroff,slidethePOWER ON/OFFswitchtoOFFposition.
Operation
3. Press the DISPLAY SETUP
VOL +/-
MUTE
and press
button
to set.
button to enter the display setting menu.
Press the
or
DISPLAY ON/OFF
to move up and down,
MAIN UNIT:
Press the DISPLAY SETUP button to
confirm.
2. Press the OPEN button on main unit to open the CD door.
button on
remote control to
14
2015.09.25
08:30:19
+08'00'