Proscend 5200N Series User Manual

G.SHDSL .bis Router User Manual V0.04
29
None: Select this option when you don’t want to configure DNS servers.
Click on Apply to save the parameters or Cancel to start configuring this page from beginning.
4
4
.
.
3
3
.
.
5
5
D
D
H
H
C
C
P
P
ADVANCED>DHCP
DHCP
Item Description
DHCP Click on the drop-down list and select below options for DHCP;
None: Select this option to disable DHCP server.
Server: Select this option when the router can assign IP addresses. Then
enter the fields for IP Pool Starting Address, Pool Size and Lease Time.
Relay: Select this option the router will relay DHCP requests and responses
between the remote server and the clients. Then enter the field for Remote
DHCP Server.
IP Pool Starting Address Enter the 1
st
address in the IP address pool.
*This field is required only when you enable DHCP server.
Pool Size Enter the size of IP address pool.
*This field is required only when you enable DHCP server.
Lease Time Enter the lease time for IP addresses.
*This field is required only when you enable DHCP server.
Client List
The table displays the list and status of clients with their Host Name, State, IP address, MAC and
Expired Time.
Static DHCP
Item Description
IP Address Enter IP address to change the static DHCP setting
MAC Address Enter the MAC address of the Ethernet device.
Static List

Proscend 5200N Series Specifications

General

Brand	Proscend
Model	5200N Series
Category	Network Router
Language	English