G.SHDSL .bis Router User Manual V0.04
40
System Password
Item Description
Admin Password Enter Password
Retype Admin Password Enter Password again for confirmation
For system security, please change the default password in the first setup otherwise unauthorized
persons can access the router and change the parameters. If you don’t change it, all users on
your network can access the router using the default password: “root”.
Click on Apply to save the parameters or Cancel to start configuring this page from beginning.
4
4
.
.
1
1
.
.
2
2
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
ADMIN>MGMT
4
4
.
.
1
1
.
.
2
2
.
.
1
1
S
S
N
N
M
M
P
P
Simple Network Management Protocol (SNMP) defines the exchange of messages between a
network management client and a network management agent for remote management of network
nodes. These messages contain requests to get and set variables that exist in network nodes in
order to obtain statistics, set configuration parameters, and monitor network events. SNMP
communications can occur over LAN or WAN connection.
The router can generate SNMP traps to indicate alarm conditions, and it relies on SNMP
community strings to implement SNMP security. The SHDSL.bis routers support
SNMPv1/SNMPv2 (RFC 1157/1901/1905) and MIB-II (RFC 1213/1493)
Click SNMP to configure the parameters for remote management via SNMP.
To Next Page
Loading...
Need help?
General
