Proscend 5200N Series - Page 48

G.SHDSL .bis Router User Manual V0.04
47
VPI: 0
VCI: 32
Click LLC
Click Next
The screen will prompt the new configured parameters. Check the parameters and Click Restart
The router will reboot with the new setting.
4
4
.
.
3
3
.
.
1
1
.
.
2
2
C
C
P
P
E
E
S
S
i
i
d
d
e
e
Click Bridge and CPE Side to setup Bridge mode of the Router and then click Next.
Enter LAN Parameters
IP: 192.168.0.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.2
Host Name: SOHO
Enter WAN1 Parameters
VPI: 0
VCI: 32
Click LLC
Click Next
The screen will prompt the new configured parameters. Check the parameters and Click Restart
The router will reboot with the new setting.