G.SHDSL .bis Router User Manual V0.04
50
Type LAN parameters:
IP Address: 192.168.10.1
Subnet Mask: 255.255.255.0
Host Name: SOHO
DHCP Service: Disable or Enable
For more DHCP service, review the chapter of DHCP Service.
Type the WAN1 Parameters:
VPI: 0
VCI: 32
AAL5 Encap: LLC
Protocol: IPoA , EoA , IPoA + NAT or EoA + NAT
Note: The Protocol used in CO and CPE have to be the same.
Click Next to setup the IP parameters.
For more understanding about NAT, review the chapter of NAT/DMZ.
IP Address: 192.168.30.2
Subnet mask: 255.255.255.0
Gateway: 192.169.30.1
Click Next
To Next Page
Loading...
