12
TC3001N 2048x1536 (3.1M) 1280*1024 (1.3M) 640x480 (0.35M)
a) Sliding the “Power” toggle switch to “On” then to “Set”
b) Rotate the menu items by “UP” or “DOWN” button, until it shows “Img Size”
c) Press “OK” to enter the setting. It shows “3.1 MP” by default.
d) Press “UP” and “DOWN” to change the value, and press “OK” to confirm the setting.
6.5 Set Movie Length
ProStalk can set the movie length between 10 ~ 90 seconds. System default is 15 seconds. This
setting will be memorized even losing the power.
a) Sliding the “Power” toggle switch to “On” then to “Set”
b) Rotate the menu items by “UP” or “DOWN” button, until it shows “M Length”
c) Press “OK” to enter the setting.
d) Press “UP” and “DOWN” to choose the right time length, and press “OK” to confirm the
setting.
6.6 Turn on/Turn off the IR Flash
The IR Flash will be automatically activated if the camera system thinks the environment light is
not enough. Picture in IR Flash is in black and white.
User can also choose to turn off the IR Flash. If this option is selected, the camera will not take
pictures in low light environment to save the power. On the other hand, all pictures taken in this
mode are colour pictures.
a) Sliding the “Power” toggle switch to “On” then to “Set”
b) Rotate the menu items by “UP” or “DOWN” button, until it shows “IR Flash”
c) Press “OK” to enter the setting.
d) Press “UP” and “DOWN” to choose between “Auto” and “Off”, and press “OK” to confirm the
setting. Every time you turn off and turn on the unit, the setting will be automatically
restored to “Auto”.
6.7 Set Camera Duty Time
The user can make the camera work in a specific time period of the day. We call this as duty time
model. By system default, the camera works 24 hours a day.
To Next Page
Loading...