ProStalk PC3000IR - 6. Setup Your Camera; 6.1 Set Camera Delay

10
6. Setup Your Camera
Menu Serial
Number
Menu Item Description
1
Set Date MM/DD
2
Set Year YYYY
3
Set Time HH:MM (24H military time format).
4
Img Size 3.1MP, 1.3MP, 0.35MP
5
Delay (Only displays when "
Delay" switch at "customize"
1min～60mins
6
M Length
Adjust the movie length (10~90 seconds). 15
seconds by default. This setting will be memorised
even losing the power.
7
IR Flash Auto; Off
8
DutyTime All Time; day (6:00~18:00); night (18:00~6:00);
Customize
9
UserInfo Max 16 characters
10
Password 6 digits
11
Language
English, German, France, Spain, Italian,
Portuguese.
12
Day Time 06—18 (day time—night time)
6.1 Set Camera Delay
Camera Delay is to set the amount of preset time in minutes the camera will sleep between PIR
triggering. User can have two kinds of settings listed below.
Frequently Used Setting
Select the Camera Delay by sliding the “Delay” toggle switch to the desired preset time interval in
minutes. User can select 1mins, 5mins, 15 mins or even select “customize”.
Customize Camera Delay Setting
If select “customize”, user can set the Camera Delay in the menu.
a) Sliding the “Delay” toggle switch to “customize”
b) Sliding the “Power” toggle switch to “On” and then to “Set”
c) Rotate the menu items by “UP” or “DOWN” button, until it shows “Delay”
d) Press “OK” to enter the setting. It shows “30 mins” by default.
e) Press “UP” and “DOWN” to change the value, and press “OK” to confirm the value. User can
choose between 1 min ~ 60mins.
f) Press “OK” to confirm the setting.